View IRKL24006_722349.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin I27094 rev. C 10/06
IRK.L240 SERIES
FAST RECOVERY DIODES Features
Fast recovery time characteristics Electrically isolated base plate Industrial standard package Simplified mechanical designs, rapid assembly High surge capability Large creepage distances 3000 V RMS isolating voltage UL E78996 approved RoHS Compliant
MAGN-A-pakTM Power Modules TM
250A
Description
The IRK.L240 Series of MAGN-A-paks uses fast recovery power diodes in four basic configurations. The semiconductors are electrically isolated from the metal base, allowing common heatsinks and compact assemblies to be built. Application includes power supplies, battery chargers, welders, motor controls and general industrial current rectification. These modules are intended for those applications where fast recovery characteristics are required.
Major Ratings and Characteristics
Parameters
IF(AV) @ TC IF(RMS) IFSM I2t @ 50Hz @ 60Hz @ 50Hz @ 60Hz I2t VRRM TJ range
IRK.L240
S10/S20 250 100 392 8000 8400 322 294 3220 S30 240 100 377 7500 7850 280 256 2800
Units
A C A A A KA2s KA2s KA 2s V
o
up to 2500 -40 to 150
C
www.irf.com
1
IRK.L240 Series
Bulletin I27094 rev. C 10/06
ELECTRICAL SPECIFICATIONS Voltage Ratings
Type number Voltage Code
06 10 IRK.L240 12 14 20 25
trr Code
S10 S10 S20 S20 S30 S30
VRRM , maximum repetitive peak reverse voltage V
600 1000 1200 1400 2000 2500
VRSM , maximum non-repetitive peak reverse voltage V
700 1100 1300 1500 2100 2600
IRRM max. @ 150C mA
50
Forward Conduction
Parameter
IF(AV) Max. average forward current @ Case temperature Max. peak, one-cycle forward, non-repetitive surge current
IRK.L240 S10/S20 S30
250 100 392 8000 8400 6750 7100 322 294 228 208 240 100 377 7500 7850 6300 6600 280 256 198 181 2800 0.98 1.31 0.97 0.60 1.75
Units
A C A A
Conditions
180o conduction, half sine wave as AC switch t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied Sinusoidal half wave, Initial TJ = T J max t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied
o
IF(RMS) Max. RMS forward current IFSM
I2t
Maximum I2t for fusing
KA2s
I2t Maximum I2t for fusing VF(TO)1 Low level value of threshold voltage VF(TO)2 High level value of threshold voltage r f1 Low level value of forward slope resistance r f2 High level value of forward slope resistance VFM Max. forward voltage drop
3220 0.98 1.31 0.75 0.41 1.57
KA2s V V m m V
t = 0.1 to 10ms, no voltage reapplied (16.7% x x IF(AV) < I < x IF(AV))TJ = TJ max (I > x IF(AV)), TJ = TJ max. (16.7% x x IF(AV) < I < x IF(AV))TJ = TJ max (I > x IF(AV)), TJ = TJ max. IFM = 800, T J = 150 oC tp = 10 ms Av. power = VF(TO) x IF(AV) + rf x (IF(RMS))2
Blocking
IRRM VINS Max. peak reverse leakage current RMS isolation voltage 50 3000 mA V TJ = 150 oC, leakage current 50Hz, circuit to base, all terminals shorted, 25C, t = 1s
2
www.irf.com
IRK.L240 Series
Bulletin I27094 rev. C 10/06
Thermal and Mechanical Specifications
TJ Tstg Max. junction operating temperature Max. storage temperature range -40 to 150 -40 to 150 0.125
o o
C C Per junction, DC operation Mounting surface flat, smooth and greased Per module
A mounting compound is recommended and the torqshould be rechecked after a period of about 3 hours to allow for spread of the compound
RthJ-C Max. internal thermal resistance junction to case RthC-S Thermal resistance, case to heatsink T Mounting torque 10% MAP to heatsink
the
K/W
0.02
K/W
4 to 6 8 to 10 850 (30) MAGN-A-pak
Nm Nm g (oz)
wt
Busbar to MAP Approximate weight Case style
DR Conduction (per Junction)
(The following table shows the increment of thermal resistence R thJC when devices operate at different conduction angles than DC)
Conduction angle
180 o 120 o 90 o 60 o 30
o
Sinusoidal conduction
0.008 0.010 0.013 0.019 0.032
Rectangular conduction Units
0.007 0.011 0.015 0.020 0.033 K/W K/W K/W K/W K/W
Conditions
TJ = TJ max.
Recovery Characteristics
Test conditions Code
Ipk (A) di/dt (A/s) 100 " " Vr (V) 50 " "
Typ. values @ T J = 150oC
Qrr (C) 135 250 360 Irr (A) 100 145 200
di dt Qrr IRM (REC) t IFM trr
S10 S20 S30
500 '' ''
Ordering Information Table
Device Code
IRK
1
D
2
L
3
240
4
-
25
5
S30
6
1 2 3 4 5 6
-
Module type Circuit configuration (See Outline Table) L = Fast recovery diode Current rating Voltage code: Code x 100 = VRRM (See Voltage Ratings Table) trr code (See Recovery Characteristics Table) S10 = 1000 ns S20 = 2000 ns S30 = 3000 ns
www.irf.com
3
IRK.L240 Series
Bulletin I27094 rev. C 10/06
Outline Table
IRKD... IRKC...
All dimensions in millimeters (inches) Dimensions are nominal Full engineering drawings are available on request UL identification number for cathode wire: UL 1385 UL identification number for package: UL 94V0 IRKJ... IRKE...
140 130 120 110 100 90 80 0 50
IRK.L240..S S S 10/ 20 eries R thJC (DC) = 0.125 K/ W
Maximum Allowable Case T emperature (C)
Maximum Allowable Case Temperature (C)
150
150 140 130 120 110 30 100 90 80 0 50 100 150 200 250 300 350 400 450 Average Forward Current (A) 60 90 120 180 DC
Conduction Period
IR K.L240..S S S 10/ 20 eries R thJC(DC) = 0.125 K/ W
Conduction Angle
30
60 90 120 180
100
150
200
250
300
Average F orward Current (A)
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
4
www.irf.com
IRK.L240 Series
Bulletin I27094 rev. C 10/06
400 350 300 250 200 150
Conduction Angle
Maximum Average Forward Power Los (W) s
180 120 90 60 30 RMS Limit
Maximum Average Forward Pow er Loss (W)
600 500 400 300 RMS Limit 200 100 0 0 50 100 150 200 250 300 350 400 Average Forward Current (A)
Conduction Period
DC 180 120 90 60 30
100 50 0 0 50 100 150 200 250 Average F orward Current (A) IR K.L240..S S S 10/ 20 eries Per Junc tion TJ = 150C
IR K.L240..S S S 10/ 20 eries TJ = 150C Per Junc tion
Fig. 3 - Forward Power Loss Characteristics
Peak Half S Wave Forward Current (A) ine At Any Rated Load Condition And With Rated V M App lied Following S urge. RR 7000 Initial T J 150C = @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 6000 5000 4000 3000 IR K.L240..S S S 10/ 20 eries Per Junc tion 2000 1 10 100
Number Of Equa l Amplitude Half Cyc le Current Pulses (N)
Fig. 4 - Forward Power Loss Characteristics
8500 7500 6500 5500 4500 3500 2500 IRK.L240..S S S 10/ 20 eries Per Junction 0.1 Pulse T rain Dura tion (s) 1 Maximum Non Repetitive S urge Current Versus Pulse T rain Dura tion. Initial T J = 150C No Vo ltage Reap plied Rated V RRMR eap plied
Peak Half S Wave Forward Current (A) ine
8000
1500 0.01
Fig. 5 - Maximum Non-Repetitive Surge Current
150 140 130 120 110 100 90 80 0 50 100 150 200 250 Average F orward Current (A) 30
Conduction Angle
Fig. 6 - Maximum Non-Repetitive Surge Current
150 140 130 120 110 30 100 90 80 0 50 100 150 200 250 300 350 400 Average Forward Current (A) 60 90 120 180 DC
Conduc tion Period
IR K.L240..S S 30 eries R thJC(DC) = 0.125 K/ W
Maximum Allowable Case T emperature (C)
Maximum Allowable Case T emperature (C)
IR K.L240..S S 30 eries R thJC (DC) = 0.125 K/ W
60 90 120 180
Fig. 7 - Current Ratings Characteristics
Fig. 8 - Current Ratings Characteristics
www.irf.com
5
IRK.L240 Series
Bulletin I27094 rev. C 10/06
Maximum Average Forward Power Loss (W)
Maximum Averag e Forward Power Los (W) s
400 350 300 250 200 150
Conduc tion Angle
550 500 450 400 350 300 250 RMS Limit 200 150 100 50 0 0 50 100 150 200 250 300 350 400 Average F orward Current (A) IRK.L240..S 30 S eries Per Junc tion TJ = 150C
Cond uc tion Period
180 120 90 60 30 R Limit MS
DC 180 120 90 60 30
100 50 0 0 50 100 150 200 250 Average Forward Current (A) IR K.L240..S S 30 eries Per Junc tion TJ = 150C
Fig. 9 - Forward Power Loss Characteristics
Fig. 10 - Forward Power Loss Characteristics
8000 7000 6000 5000 4000 3000 2000 1000 0.01 IRK.L240..S S 30 eries Per Junc tion 0.1 Pulse T rain Duration (s) 1
Peak Half S Wave F ine orward Current (A)
Peak Half S Wave Forward Current (A) ine
7000 At Any Ra ted Loa d Co nd ition And With Ra ted V R Ap plied Following S urge. RM Initia l T = 150C J @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
6000
Maximum Non Repetitive S urge Current Versus Pulse T rain Dura tion. Initia l T J = 150C No Voltage Rea pplied Rated V RRM Rea pplied
5000
4000
3000 IRK.L240..S S 30 eries Per Junc tion 2000 1 10 100
Number Of Equa l Amplitude Half Cyc le Current Pulses (N)
Fig. 11 - Maximum Non-Repetitive Surge Current
10000 Instantaneous Forward Current (A) Instantaneous Forward Current (A) IRK.L240..S S S 10/ 20 eries Per Junc tion 10000
Fig. 12 - Maximum Non-Repetitive Surge Current
IRK.L240..S S 30 eries Per Junc tio n
1000
1000
TJ= 25C TJ= 150C 100 1 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V)
TJ= 25C TJ= 150C 100 0.5
1
1.5
2
2.5
3
3.5
4
4.5
Instantaneous Forward Voltage (V)
Fig. 13 - Forward Voltage Drop Characteristics
Fig. 14 - Forward Voltage Drop Characteristics
6
www.irf.com
IRK.L240 Series
Bulletin I27094 rev. C 10/06
Maximum R everse R overy Charge - Qrr (C) ec
IR K.L240..S 10 TJ = 150 C
Maximum R everse R overy Current - Irr (A) ec
150 140 130 120 110 100 90 80 70 60 50 40 30 20 10
10
110 100 90 80 70 60 50 40 30 20 10 10 20 30 IRK.L240..S S 10 eries TJ = 150 C 40 50 60 70 80 90 100
IFM = 1000A 500A 200A 100A 50A
I FM = 1000A 500A 200A 100A 50A
20
30
40
50
60
70
80
90
100
R ate Of Fall Of Forward Current - di/ dt (A/ s)
R ate Of Fall Of Forward Current - di/ dt (A/ s)
Fig. 15 - Reverse Recovery Charge Characteristics
500 450 400 350
200A
Fig. 16 - Reverse Recovery Current Characteristics
300 250 200 150 100 50 0 0 50 100 150 200 R ate Of Fall Of Forward Current - di/ dt (A/ s) IRK.L240..S 20 T J = 150 C
I = 1000A FM 500A 200A 100A 50A
Maximum R everse R overy Charge - Qrr (C) ec
IR K.L240..S 20 TJ = 150 C
IFM = 1000A 500A
300 250 200 150 100 50 0 0 50 100 150 200 R ate Of Fall Of Forward Current - di/ dt (A/ s)
50A 100A
Maximum Reverse Recovery Current - Irr (A)
Fig. 17 - Reverse Recovery Charge Characteristics
Maximum R everse R overy Charge - Qrr (C) ec
IFM = 1000A
Fig. 18 - Reverse Recovery Current Characteristics
Maximum R everse R ecovery Current - Irr (A)
500 450 400 350 300 250 200 150 100 50 0 0 50 100 150 200 R ate Of Fall Of Forward Current - di/ dt (A/ s) IR K.L240..S S 30 eries TJ = 150 C
500A 100A
300
I FM = 1000A
250 200 150 100 50 0 0 50 100
500A 100A
IR K.L240..S S 30 eries TJ = 150 C 150 200
R ate Of F Of Forward Current - di/ dt (A/ s) all
Fig. 19 - Reverse Recovery Charge Characteristics
Fig. 20 - Reverse Recovery Current Characteristics
www.irf.com
7
IRK.L240 Series
Bulletin I27094 rev. C 10/06
1E 5
Peak F orward Current (A)
1E 4
0.2 0.4 1 2
20 joules per pulse 4 10
20 joules per pulse 10 0.4 0.2 0.1 0.04 0.02 0.01 1 2 4
1E 3
0.1 0.04 0.02 0.01
1E 2
1E 1 tp 1E 0 1E 1
IRK.L240..S S 10/ 20 S inus oidal P e uls TJ = 150 C 1E 2 1E 3 1E4 41E 1 1E 1E 1
tp
IRK.L240..S S 10/ 20 T rapezoidal Pulse TJ = 150 C 1E 2 1E 3 1E 4
Pulse Basewidth (s)
Pulse Basewidth (s)
Fig. 21 - Maximum Forward Energy Power Loss Characteristics
1E5 IR K.L240..S S 10/ 20 S inusoidal Pulse T C = 90 C
Peak Forward Current (A)
tp 1E4
tp
IRK.L240..S S 10/ 20 S inusoidal Pulse T C = 100 C
1E3
20000 10000 5000 2500 1500 1000 400 200 50 Hz
20000 10000 5000 2500 1500 1000
400
200
50 Hz
1E2 1E 1
1E2
1E 3
1E 1E 1 4 1 1E4 1E
1E 2
1E3
1E 4
Pulse B asewidth (s)
Pulse Basewidth (s)
Fig. 22 - Frequency Characteristics
1E5 IR K.L240..S S 10/ 20 T rapezoidal Pulse TC= 90 C
Peak Forward Current (A)
tp 1E4
tp
IRK.L240..S S 10/ 20 T rapezoidal Pulse TC = 100 C
1E3
2500 1500 1000 400 200 50 Hz
2500 1500 1000
400
200
50 Hz
1E2 1E 1
1E 2
1E 3
1E4 1E 1E 1E 1 4 1
1E 2
1E 3
1E 4
Pulse Basewidth (s)
Pulse Basewidth (s)
Fig. 23 - Frequency Characteristics
8
www.irf.com
IRK.L240 Series
Bulletin I27094 rev. C 10/06
1E 5
20 joules per pulse
Peak F orward Current (A)
1E 4
0.4 0.2 0.1 0.04 0.02 0.01 1
2
4
10
20 joules per p ulse 1 2 4 10
1E 3
1E 2
0.1 0.04 0.02 0.01
0.4 0.2
1E 1 tp 1E 0 1E 1
IRK.L240..S 30 S oidal P inus ulse T J = 150 C 1E 2 1E3 1E 1E1 1 4 1E4 1E
tp
IRK.L240..S 30 T rapezoidal Pulse T J= 150 C 1E 2 1E3 1E 4
Pulse Basewidth (s)
Pulse Basewidth (s)
Fig. 24 - Maximum Forward Energy Power Loss Characteristics
1E 5 IRK.L240..S 30 S inusoidal Pulse T C = 90 C
IRK.L240..S 30 S inusoidal Puls e T C = 100 C
Peak Forward Current (A)
tp
tp
1E 4
1E 3
20000 10000 5000 2500 1500 1000 400 200 50 Hz
20000 10000 5000 2500 1500 1000 400 200 50 Hz
1E 2 1E 1
1E2
1E 3
1E 41E1 4 1E 1E1
1E 2
1E3
1E 4
Pulse Basewidth (s)
Pulse Basewidth (s)
Fig. 25 - Frequency Characteristics
1E 5 IRK.L240..S 30 T rapezoidal Pulse T C = 90 C
IRK.L240..S 30 T rapezoidal Pulse T C = 100 C
Peak Forward Current (A)
tp 1E 4
tp
1E 3
5000
2500 1500 1000
400
200
50 Hz
5000 2500 1500 1000
400
200
50 Hz
1E 2 1E 1
1E 2
1E 3
1E 41E1 4 1E 1E1
1E 2
1E3
1E 4
Pulse Basewidth (s)
Pulse Basewidth (s)
Fig. 26 - Frequency Characteristics
www.irf.com
9
IRK.L240 Series
Bulletin I27094 rev. C 10/06
T ransient T hermal Impedance Z thJC(K/ W)
1 S tead y S tate Value: R thJC = 0.125 K/ W 0.1 (DC Operation)
0.01
0.001 IRK.L240.. S eries Per Junction 0.0001 0.0001
0.001
0.01
0.1
1
10
100
S quare Wave Pulse Duration (s)
Fig. 27 - Thermal Impedance ZthJC Characteristics
10
www.irf.com
IRK.L240 Series
Bulletin I27094 rev. C 10/06
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/06
www.irf.com
11

▲Up To Search▲

Price & Availability of IRKL24006

	To Download IRKL24006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .